苏州宝玛-高品质的线切割机床
宝玛牌线切割专用钼丝简介 Introduction of Baoma brand molybdenum wire for Wire cut EDM machine
本产品采用高纯度钼丝原料经专用设备，冷拉新工艺制造，主要用于电火花线切割机。
Material: high purity molybdenum
Technical: the most advanced cold drawn technology
其主要特点如下：
1.抗拉强度高，标准较GB4182-2003钼丝标准提高12%左右， 在相同使用条件下，不容易断丝。High tensile strength: 12% higher than National standard GB4182-84
Under the same working condition, there will be less wire broken for BAOMA brand Moly-wire
2.延伸率低，不大于3%，不易打结，使用总，钼丝不易拉长可以提高机床的加工的稳定性和尺寸精度。
Percentage of Extension: less than 3%, which make our moly-wire not easy to tie a knot and not easy to elongate to improve the processing stability and the precision.
3.加工稳定性好，表面粗糙度及加工精度高，使用寿命长，一般高于热拉钼丝的1.2倍左右。
Longer using life: Good finishing, high precision. Can be used 1.2 times (improve 120%) longer than normal moly-wire.
4.采用真空包装，保存期长，不变质，一般可以保存一年以上。
Vacuum packing: can be kept for more than one years without go bad.
钼丝常用规格换算表:
|
Diameter(mm)
|
Length(m)/g
|
Diameter(mm)
|
Length (m)/g
|
Diameter(mm)
|
Length(m)/g
|
|
0.08
|
19.506
|
0.14
|
6.369
|
0.18
|
3.853
|
|
0.1
|
12.834
|
0.15
|
5.548
|
0.20
|
3.121
|
|
0.12
|
8.669
|
0.16
|
4.876
|
0.22
|
2.579
|
|
0.13
|
7.386
|
0.17
|
4.319
|
0.25
|
1.997
|
